Cautions for using new fire hoses

Avoid pulling hard on the ground when using a fire hose, especially when filled with water, and special care should be taken to prevent the hose from coming into contact with sharp objects such as nails and glass pieces. When repositioning is required, it should be lifted and moved to reduce wear between the hose and the ground. Do not stretch the fire hose hose into a V shape to avoid hose wear. In addition, it should be noted that the fire hose cannot be in contact with acid and alkali. When oil contact is required, double-sided tape should be used. Hard and heavy objects should be avoided from being pressed on the waterway. When vehicles need to pass through the established waterway, water belts should be placed in the passing part to protect the bridge in advance. When the PVC Fire Hoses are laid on the railway, the rubber hose passes under the rail. Or, it is recommended to use the hose outside the building, in cold places, and you need to choose a suitable variety according to its low temperature resistance, so as not to freeze the hose. After the rubber hose and the interface are re-bound, the rubber hose and the interface can withstand 1.5 times the working pressure, and the fire hose must not slip, leak, or be damaged.

https://www.sjfirehose.com/