How to use portable fire monitor machinery

The use of portable fire monitor machinery usually requires the following steps:

1. Inspection and preparation: Before using a portable fire monitor, first make sure it is in good working condition. Check whether the appearance of the fire monitor is intact, whether the connecting parts are tight, and whether the water and power sources are reliable. Make sure there are no flammable items or other obstacles near the fire monitor.

2. Prepare the water source: Determine the water source to be used, which can be a fire pool, water tank, fire hose or other water source. Make sure the water supply from the water source is sufficient and prepare the piping system to connect the water source to the fire monitor.

3. Connect the water source and power supply: According to the design of the fire monitor, connect the water source and power supply (if any) to the corresponding interfaces of the fire monitor. Make sure the connection is firm to avoid water leakage or circuit failure.

4. Adjust the water spray parameters: According to the situation at the fire scene, adjust the water spray parameters of the fire monitor, including water flow, spray angle and spray range, etc. Usually, the adjustment can be made through the control panel or handle on the fire monitor.

5. Position the fire monitor: Move the fire monitor to the location where the fire needs to be extinguished, and adjust the direction and angle of the fire monitor according to the location and size of the fire. Make sure the fire monitor is firmly supported on a stable ground to prevent it from tipping over or moving.

6. Start the fire monitor: According to the operating manual or instructions of the fire monitor, start the water pump and water spray system of the fire monitor. Ensure that the water flow is stable and adjust the intensity and direction of the water flow as needed.

7. Firefighting operation: Take appropriate firefighting operations according to the fire situation and the water spraying capacity of the fire monitor. The fire can be controlled by controlling the water spraying angle and range of the fire monitor, and ensure that all areas of the fire scene are covered as much as possible.

8. Monitoring and adjustment: During the fire extinguishing process, monitor the changes in the fire at any time and adjust the water spraying parameters and direction of the fire monitor as needed. Ensure that the fire extinguishing process proceeds smoothly and the fire is controlled within a controllable range as soon as possible.

9. Safe shutdown: After the fire is extinguished, shut down the water pump and water spray system of the fire monitor in time, and disconnect the water source and power supply. Ensure that the fire monitor is in a safe state, and perform necessary maintenance and cleaning work in preparation for the next use.

https://www.sjfirehose.com/