Methods to extend the service life of layflat hose

1. Correct installation and connection

Choose the right connector:

According to the specifications and usage requirements of the hose, select a connector with reliable quality that matches the hose. Make sure the material, size and pressure resistance of the connector are compatible with the hose.

Check the sealing performance of the joint, such as whether the sealing gasket is intact and whether the thread is regular, to prevent leakage at the connection.

Correct installation:

When installing the hose, avoid excessive bending, twisting or stretching. The hose should be laid according to its natural bending radius to reduce damage to the hose structure.

Make sure the hose and connector are securely connected. Use appropriate tools to tighten them, but do not use excessive force to avoid damaging the hose or connector.

2. Fair Use

Control pressure and flow:

Understand the rated pressure and flow range of the hose, and do not exceed the specified value during use. Excessive pressure and flow will cause excessive load on the hose and accelerate the damage of the hose.

Install pressure regulators and flow control valves to ensure the hose operates within a safe operating range.

Avoid overload and shock:

Avoid placing excessive loads or sudden impacts on the hose. For example, do not place heavy objects on the hose or allow a vehicle to run over the hose.

When starting and stopping fluid transfer equipment, do so slowly to reduce shock to the hose.

To prevent overheating or underheating:

If the hose is used to transport high-temperature or low-temperature fluids, a hose suitable for the corresponding temperature range should be selected and necessary insulation or heat preservation measures should be taken.

Avoid exposing the hose to extreme temperature environments for a long time to avoid affecting the material properties and service life of the hose.

3. Regular maintenance and inspection

Daily inspection:

Regularly check the appearance of the hose, including whether there is wear, cracks, deformation, leakage, etc. Especially focus on the joints, bends and places that are often subject to friction.

Check whether the hose connection is firm and tighten it if it is loose.

Cleaning and maintenance:

After use, clean the residue inside and outside the hose in time. For hoses that transport different media, the appropriate cleaning method should be selected according to the properties of the media.

The hose can be kept clean by flushing with water, cleaning with detergent, or blowing with compressed air.

Regular replacement of wearing parts:

For the consumable parts such as joints and sealing rings on the hose, their wear should be checked regularly and replaced in time. Ensure that the quality and performance of the consumable parts meet the requirements to ensure the overall sealing and reliability of the hose.

4. Proper storage

Avoid direct sunlight:

When the hose is not in use, it should be stored in a cool, dry place away from direct sunlight. Ultraviolet rays will age the hose material, make it brittle, and reduce its service life.

Keep away from heat and chemicals:

Do not place the hose near heat sources, such as heaters and stoves, to prevent the hose from being deformed or damaged by high temperature. At the same time, keep it away from chemicals to prevent them from corroding the hose.

Correct winding:

When storing the hose, you can roll it up neatly to avoid folding or twisting. You can use a dedicated hose reel or rack to store the hose to maintain its shape and performance.

Through the comprehensive application of the above methods, the service life of the layflat hose can be effectively extended and its use efficiency and safety can be improved.

If you want to know how to extend the service life of PVC/TPU layflat hose , welcome to visit www.sjfirehose.com !